Click image to view full size image
Brief introduction
1. To be equipped with hexagonal vertical shaft and hexagonal drive drilling rod, with strong rigidity and big
transfer torque.
2. The entire machine is featured by strong adaptability, high motive power, low cost and broad compatibility.
3. To be provided with hydraulic control pressure feed mechanism for the purpose of improvement of
construction efficiency.
4. To use hydraulic control well head displacement mechanism for enlargement of initial hole diameter;
Technical parameters
Main machine technical parameter | |||
Drilling depth |
200m |
||
Drilling diameter |
300mm |
||
End diameter |
75mm |
||
Drilling pipe diameter |
50mm |
||
Drilling angle |
90°~75° |
||
Drilling weight(no include power) |
1050kg |
||
Unity machine dimensions |
2.1×0.9×1.3m |
||
Spindle | |||
Spindle speed |
64,128,287,557r/min |
||
Spindle stroke |
450mm |
||
Hoist | |||
Max.single line hoisting capacity |
2400kg |
||
Reel lifting speed |
17,35,75,151r/min |
||
Reel diameter |
140mm |
||
Wire rope diameter |
13mm |
||
Wire rope cubic measure |
35m |
||
Hug floodgate diameter |
260mm |
||
Hug floodgate belt width |
70mm |
||
Distance between drill and hole |
400mm |
||
Power | |||
Diesel engine |
s1105 Model, 22HP |
||
Electric Motor |
Y160M-4 ,15kw 1440r/min |
||
Mud pump | |||
Type |
Horizontal single urn twin-action |
||
Displacement |
170L/min |
||
Maximum pressure |
3.0Mpa |
||
Work pressure |
1.5Mpa |
||
Water inlet caliber |
40mm |
||
Water to exit caliber |
30mm |
||
Triangle conveyer belt |
B1728mm |
||
Hydraulic pump | |||
specification |
CBT-F-314 |
||
Triangle conveyer belt |
B1100×1 |
||
Useful | |||
|
Geology general check exploration,Earth physics exploration,sampling test in mining, water Well,,Geothermal ,Blast opening etc drilling engineering | |||
On customers' working site
Delivery
